The Angus Super Gasification Log Boilers
-This is one of our top range wood gasification log boilers
-Full MCS and Hetas certification
-RHI approved boilers so they are compliant as RHI certified boilers
-Rated at 92% net heat efficiency
-Logs from 500mm to 1000mm long and up to 10" diameter depending on size of boiler
-Suitable for open vented or pressurized system -6mm inner jacket for long life cycle
-Minimal ash output
-Must be installed with appropriately sized accumulator tank (50:1 ration of kW output to litres of thermal store) and Laddomat thermoregulator to ensure maximum efficiency of the boiler
-Mechanical heat exchanger cleaning handle
-Hinges on doors can adjusted vertically
-Fan modulation adjustable for maximum burn efficiency
-Primary and secondary air vents adjustable to optimize burn efficiency
-Remote control with 15 metre wire as extra can be fitted to control panel
-This boiler must be fitted with an appropriately sized stainless steel twin wall flue (single wall flue is not suitable)
Available in 7 models
18kW 25kW 40kW 60kW 80kW 96kW 130kW
Buy now from £2292.00
( plus delivery and vat)

For more information please click here


The Angus Orligno 200 Gasification Log Boilers
-This is our top of the the range wood gasification log boilers
-Full MCS and Hetas certification
-RHI approved boilers so they are compliant as RHI certified boilers
-Rated at 92% net heat efficiency
-Logs from 500mm to 1000mm long and up to 10" diameter depending on size of boiler
-Suitable for open vented or pressurized system
-8mm inner jacket for prolonged life cycle
-Minimal ash output
-Must be installed with appropriately sized accumulator tank (50:1 ration of kW output to litres of thermal store) and Laddomat thermoregulator to ensure maximum efficiency of the boiler
-Silicon sealed glass fibre rope on loading chamber door for tight seal
-New door handle locking mechanism to enable a strong seal of the loading chamber with the minimum of effort
-Absorber strip to take any smoke loss form loading chamber to the side of the boiler
-Connections for cooling coil at rear of boiler for ease of installation in confined spaces
-Mechanical heat exchanger cleaning handle
-Hinges on doors can adjusted vertically or horizontally
-Fan modulation adjustable for maximum burn efficiency
-Primary and secondary air vents adjustable to optimize burn efficiency
-Specially designed firebrick that has a 1 year warranty. It is made of high grade alumina silica refractory concrete heat resistant to 1350 degrees Celsius and improves the flow of the combustion gases through the combustion chamber.
-Hinged control panel cover
-Remote control with 15 metre wire as extra can be fitted to control panel
-This boiler must be fitted with an appropriately sized stainless steel twin wall flue (single wall flue is not suitable)

Available in 5 models
18kW 25kW 40kW 60kW 80kW
Buy now from £2910.00
( plus delivery and vat)

For more information please click here



The Angus Evo Multi Fuel Boilers
-Burns Wood, Coal, Coke and Peat -Rated at 75% net heat efficiency
-Logs from 245mm to 545mm long and up to 6" diameter depending on kW output of boiler
-Spacious combustion chamber with large opening for easy fuel loading
-High combustion performance
-Control of primary air flow
-Control of secondary air flow
-Control of chimney draught
-Typical 4 hour burn times on a full load lof seasoned wood
-Pressure and temperature indicator
-Tested to 4.0 Bar
-Suitable for both open vented and pressurized systems
-Comes with own ash pit and cleaning tools
-This boiler must be fitted with an appropriately sized stainless steel twin wall flue (single wall flue is not suitable)
Available in 4 models
17kW 27kW 34kW 41kW
Buy now from £929.00
(plus delivery and vat)

For more information please click here


The Angus Max Multi Fuel Boilers
-Burns Wood, Coal, Coke and Peat -Rated at 75% net heat efficiency
-Logs from 335mm to 935mm long and up to 6" diameter depending on kW output of boiler
-Spacious combustion chamber with large opening for easy fuel loading
-High combustion performance
-Control of primary air flow
-Control of secondary air flow
-Control of chimney draught
-Typical 4 hour burn times on a full load lof seasoned wood
-Pressure and temperature indicator
-Tested to 4.0 Bar
-Suitable for both open vented and pressurized systems
-Comes with own ash pit and cleaning tools
-This boiler must be fitted with an appropriately sized stainless steel twin wall flue (single wall flue is not suitable)
Available in 7 models
38kW 48kW 58kW 68kW 77kW 86kW 95kW
Buy now from £1431.00
(plus delivery and vat)

For more information please click here




The Angus ORLIGNO 400 Pellet Boiler
-The Angus Orligno 400 pellet boiler is one of the most highly efficient pellet boilers available.
-Full MCS and Hetas certification
-There are 2 outputs available in this range 16kW and 30Kw.
-The 16kW is rated from 3.9-16.0kW with a gross heat efficiency of 89.4%
-The 30Kw is rated from 7.8-30.0Kw with a gross heat efficiency of 91.8%
-The boilers are ideal for providing all your central heating and domestic hot water requirements.
-They can take pellets from 6-8mm and length 10-50mm.
-The boilers can heat a well insulated property up to 300m2.
-The boiler comes with a 5 year warranty on boiler tightness.
-The pellets are burned up automatically.
-The pellet boiler has minimal ash output.
-The Angus Orligno 400 pellet boiler can be incorporated directly into any heating system.
-If the customer requires the boiler can be linked with a 500 litre accumulator tank.
-This helps to reduce boiler cycle times which gives increased efficiency and extended service life to the boiler itself.
-It also gives the customer a 500l instantaneous back up as a heat buffer for the colder months.
-The hopper is generously sized at 450 litres and enables a long burn time without the necessity to reload.
-This can be 2 days at maximum output, 5 days on average output and 7 days on nominal output.
-Effective design of feeder system ensures correct burning process, avoids blockages in fuel feeding, avoids fouling of the furnace, backfire to the container and blow out.
-Suitable for open vented system or pressurized system
-This boiler must be fitted with an appropriately sized stainless steel twin wall flue (single wall flue is not suitable)


Available in 2 models
16kW Buy now £3845.00 (plus delivery and vat)
30kW Buy now £4218.00 (plus delivery and vat)




The Angus Orligno 500 Pellet Boiler
-This is our top of the the range wood pellet boiler
-Full MCS and Hetas certification
-RHI approved boilers so they are compliant as RHI certified boilers
-Burns pellets 6-8mm Diameter 10-50mm Long
-Rated at 92% net heat efficiency
-255 litre container for long burn times without necessity for extra loading
-Self ignition
-Spacious combustion chamber with large opening for easy fuel loading
-Boiler has microprocessor controller to ensure fuel burn efficiency and control numerous safety features
-170 hour burn time at average power
-93 hour burn time at average power
-46 hour burn time at maximum power
-Effective design of feeder system ensures correct burning process, avoids blockages in fuel feeding, avoids fouling of the furnace, backfire to the container and blow out.
-Suitable for open vented system or pressurized system
-This boiler must be fitted with an appropriately sized stainless steel twin wall flue (single wall flue is not suitable)

Available in 1 model
25kW
Buy now £5385.00
(plus delivery and vat)


<



Available in 7 models
18kW 25kW 40kW 60kW 80kW 96kW 130kW
Buy now from £2292.00
( plus delivery and vat)

For more information please click here

The Angus Orligno 600 Hot Air Blower

- Typically 20 to 35% heavier than others in its range as they are manufactured with thicker boiler steel plate for increased wear resistance/life expectancy (our boiler has a 6mm inner and 4mm outer as opposed to 5mm inner and 3mm outer boiler steel plate).
- They have one of the highest heat efficiency ratings (92% as opposed to 85% standard) for a hot air blower allowing a longer burn cycle and reduced wood fuel consumption.
- Larger combustion chamber volume than others in its range allowing a larger wood fuel load.
- Larger log length from 500mm for 18kW to 1000mm Long for 80kW.
- Ability to burn all types of wood and handle logs up to 10" Diameter.
-Glass fibre rope on loading chamber door for tight seal
-Absorber strip to take any smoke loss from loading chamber to the side of the boiler -Hinges on doors can adjusted vertically or horizontally
-New door handle mechanism to enable a tight seal on the loading and combustion chamber doors with minimal effort when closed
-Hinged control panel cover -Fan modulation adjustable for maximum burn efficiency
-Primary and secondary air vents adjustable to optimize burn efficiency
- Handle feature to mechanically clean out any pitch in the heat exchanger tubes.
- Control panel can be altered as and when required to control the following;
- Regulate the temperature of the accumulator tanks
- Vary the temperature differential of the water in the boiler from that of the accumulator tank before switching to gasification mode.
- Alter the blow through interval for burning off the gases.
- Alter the blow through time for burning off the gases. Lower flue gas temperatures (less than 160 degrees for 25/40/60/80kW) as the water jacket surrounds the combustion chamber not only from all 4 sides but the base of the boiler as well). Along with a high efficiency rating this helps a lower running temperature of the stainless steel flue.
- Regulate the speed of the self-modulating fan.
- Wire a remote control so the control panel can be altered from another location.
-Overheating protection system. When the temperature rises to above 97 °C it will automatically turn the fan off and ensure the pump is kept turned on.

    site map